The UK website for the International Canoe

Thu, 21 Feb, 2019

IC Random Images

p10101211.jpg
You are here : Home

IC Photo Gallery

Images of ICs, ACs and One-Designs


Home Register Login
Album list Last uploads Last comments Most viewed Top rated My Favorites Search
Home > Asymmetric Canoes > Jet - Building a new AC

TITLE  +   - 
FILE NAME  +   - 
DATE  +   - 
POSITION  +   - 
12_All_frames_glued_in.jpg
Keepers with spline being glued in1459 viewsRetained spline for support for dancing deck - only 4mm single layer carbon but strong on edge and very lightweight
14_Frames_cut_out_again.JPG
Frames for lateral support1052 viewsFrames in place
20_Inner_of_mast_step.JPG
Mast step detail1032 views
21_Forestay_supports_in_place.JPG
Front bulhead850 viewsForestay mounts requiring some re-inforcement
23_Cutouts_of_bh_s_from_bows.JPG
Main V bulkhead1462 viewsSomewhat cut down and also now directly against mast step.
2_Sizing_up_the_spinnaker_pole_tube.JPG
Keepers1556 viewsNeeded to ensure gunwales are at correct spacing to meet rules.
3_Dagger_case_cut_out.jpg
Cut out in hull skin for dabber board case757 views
41_front_side_view.JPG
Jet - AC in build1478 viewsView shows new pole mechanism exiting from centre.
43_Stbd_rear_quarter.JPG
Jet - rear quarters view1687 viewsView shows new underfloor spinnaker chute
4_Dagger_case.jpg
Dagger board case components888 views4mm foam single layer carbon, jigged in boat and glued then carbon layer applied on outer surface.
5_Dagger_case_and_bh_in_place.jpg
Dagger board case stuck in1377 viewsFront edge is part of main bulkhead
6_Dagger_case_jigs.jpg
Dagger board case cassette1310 viewsCassette insert will have a sleeve which matches board encased in a foam boax whch then slots into teh cassette but can be taken out if board changed.
78 files on 7 page(s) 1


Bridge by mehdiplugins.com