International Canoe
- the ultimate sailing challenge
There are a number of builders and suppliers who will provide the items necessary to build a complete canoe. Most ICs are completed by their owners, either working from a bare shell or from a more advanced state.
RAZORBACK
BOATS:
From the highest specification boats to kits
at any stage. Also sliding seats, carriages,
foils etc. All aspects of IC building and
repair covered,
including fitting out, alloy fabrication, anodising (most colours), spraying, painting, masts, sails, fittings, epoxies
and glues.
Contact:
Rob Michael,
63 Brook Gardens,
Emsworth,
Hants,
PO 1 0 7JZ
Tel: 01243-430253 or Mobile 0589-4007441.
JOHN ELLIS:
High tech ICs to order.
55 Greenfield Drive,
Eaglescliff,
Stockton-on-Tees,
TS 16 OHD Tel:
0 1642-652682 (Home) or 0 1642-780663 (Office).
GILES WINDEBANK:
Will build ICs to order.
32 Mill Road,
Regents Park,
Southampton,
SOI 4JA
Tel: 01703-3208391.
QUICKSILVER FOILS:
Alan Powell completes bare shells to individual
requirements. Supplier and maker of daggerboards,
rudders, cassettes, sliding seats and carriages.
3 Kimbells Close,
Shabbington,
Aylesbury,
Bucks
Tel: 01844-201243
e-mail alan.powell@which.net
There are a few moulds in private hands, and arrangements will have to
be made with the individuals concerned for their loan.
SUPPLIERS
Masts: Usually Proctor Kappa or Lambda, Superspars
M7. Carbon masts are often seen at the front of
the fleet, made by Angell, Brown/Ellis, Claridge
or Proctor. Also some one-offs by professional
or amateur builders.
Sails: Almost any sailmaker will make a set of
sails if you ask. The following sailmakers (in
alphabetical order) feature among the faster boats: Hyde, Morrison, Orange,
Rush, Sanders.
Foils: Most foilmakers (e.g. Linton, S&T,
Milanese) will supply you with a set of foils to whatever design you fancy.
Alan Powell of Quicksilver Foils (see above) is an experienced IC sailor.
Deck
Fittings: At owners choice (and depth of pocket).